RUST-X CUTTING OIL | WS50 water soluble coolants | Milky white


Quantity: 26 Liters
Price:
Sale priceRs. 5,062.20

Tax included Shipping calculated at checkout

Description

Water Soluble Coolants -WS50's main function is to remove heat from the cutting tool, chip and work piece. The cutting oils are manufactured from highly refined Group 2 base oils that are low in Sulphur content. Group II base oils are defined as being more than 90 percent saturates, less than 0.03 percent sulfur and with a viscosity index of 80 to 120. They are often manufactured by hydrocracking, which is a more complex process than what is used for Group I base oils. This gives better life to the tank compared to cutting oils made from Group 1 base oils. To perform the cooling function properly in a given operation, the viscosity of a finished cutting oil should be low enough to clear the chips and not insulate the heat from the operation, but high enough to control oil misting. RUST-X specialized cutting oils provide added benefits and specialized properties none other oils provide. These are achieved through Rust-X careful blending of select oils with appropriate additives which provide higher lubrication, excellent corrosion protection & longer tank life. For the maximum performance, from either mineral oil based, synthetic oil based or water soluble cutting fluids, Rust-x offers a complete selection of top quality metalworking oils for the industry. Soluble Oils are used where rapid heat removal is the major requirement. Rust X water Soluble Oils are blended from mineral oils, emulsifiers, rust inhibitors, extreme pressure additives and other coupling agents. The products are mixed with water in normal starting proportions of 3% to 10% for most operations. All RUST-X rust preventive oils are Barium & Heavy Metal Free.

FEATURES

  • Rust prevention to the component from cutting oils and water after machining
  • Cutting efficiency 1.5 to 2 times compared to conventional oils
  • Longer tank life 6-9 months without fouling owing to world class biocides
  • Higher lubrication due to better quality oils
  • Low concentration of blend 1:20 to 1:40 m Operational up to 700 ppm of hard water
  • Fewest nicks and wear ability on tools
  • Lower operational temperatures

APPLICATION

Soluble Oils are used where rapid heat removal is the major requirement. Rust X water Soluble Oils are blended from mineral oils, emulsifiers, rust inhibitors, extreme pressure additives and other coupling agents. The products are mixed with water in normal starting proportions of 3% to 10% for most operations.

TECHNICAL SPECIFICATION


Physical Properties   


Value

Colour                        


Milky white

Base oil     


Group II

Viscosity @ 40° C before solution             

 

  52 cSt

Emulsion Test Hard Water - No Oil and No Cream

 

700ppm

water by %(by weight)

 

0%

Corrosion - Number of pits and intensity of staining -

 

NIL

Froth Test at 400ppm         

 

Hard Water - No 

Cast Iron Corrosion              


Pass 

Specific gravity 


0.88-0.96

Flash point


100 ° C

pH @ 5%


8-9

Odour


Slight

Oil content                        


30-40%

You may also like

Recently viewed